ABB IRB 2600 - CAUTION - Hot Parts May Cause Burns

1.2.3.2 CAUTION - Hot parts may cause burns!
Description
During normal operation, many robot parts become hot, especially the drive motors
and gearboxes. Sometimes areas around these parts also become hot. Touching
these may cause burns of various severity.
Because of a higher environment temperature, more surfaces on the robot get hot
and may result in burns.
Elimination
The instructions below detail how to avoid the dangers specified above:
InfoAction
Always use your hand, at some distance, to
feel if heat is radiating from the potentially
hot component before actually touching it.
1
Wait until the potentially hot component has
cooled if it is to be removed or handled in any
other way.
2
Product manual - IRB 2600 25
3HAC035504-001 Revision: G
© Copyright 2009-2015 ABB. All rights reserved.
1 Safety
1.2.3.2 CAUTION - Hot parts may cause burns!