ABB IRB 2600 - Risk of Disabling Function Reduced Speed 250 MM;S

1.2.4.5 Risk of disabling function "Reduced speed 250 mm/s"
Note
Do not change Transm gear ratio or other kinematic system parameters from
the FlexPendant or a PC. This will affect the safety function "Reduced speed 250
mm/s".
36 Product manual - IRB 2600
3HAC035504-001 Revision: G
© Copyright 2009-2015 ABB. All rights reserved.
1 Safety
1.2.4.5 Risk of disabling function "Reduced speed 250 mm/s"