ABB IRB 2600 - WARNING - the Unit Is Sensitive to ESD

1.3.7 WARNING - The unit is sensitive to ESD!
Description
ESD (electrostatic discharge) is the transfer of electrical static charge between two
bodies at different potentials, either through direct contact or through an induced
electrical field. When handling parts or their containers, personnel not grounded
may potentially transfer high static charges. This discharge may destroy sensitive
electronics.
Elimination
NoteAction
Wrist straps must be tested frequently to ensure
that they are not damaged and are operating cor-
rectly.
Use a wrist strap1
The mat must be grounded through a current-limit-
ing resistor.
Use an ESD protective floor mat.2
The mat should provide a controlled discharge of
static voltages and must be grounded.
Use a dissipative table mat.3
Location of wrist strap button
The location of the wrist strap button is shown in the following illustration.
IRC5
The wrist strap button is located in the top right corner.
A
xx1300000856
Wrist strap buttonA
Product manual - IRB 2600 53
3HAC035504-001 Revision: G
© Copyright 2009-2015 ABB. All rights reserved.
1 Safety
1.3.7 WARNING - The unit is sensitive to ESD!