ABB IRB 2600 - Changing the Oil, Axis-1 Gearbox on Suspended Robots

3.4.3 Changing the oil, axis-1 gearbox on suspended robots
Floor mounted or suspended robot
Depending on whether the robot is floor mounted or suspended, the method of
changing the oil is different.
How to change oil if the robot is floor mounted, see Changing the oil, axis 1 gearbox
on floor mounted robots on page 153.
Location of oil plugs
The axis-1 gearbox is located between the frame and base of the robot. The oil
plugs are shown in the figures.
Valid for serial numbers from 101000- and 501000-
A
B
xx1200000883
Oil plug, ventingA
Oil plug, draining and fillingB
Continues on next page
158 Product manual - IRB 2600
3HAC035504-001 Revision: G
© Copyright 2009-2015 ABB. All rights reserved.
3 Maintenance
3.4.3 Changing the oil, axis-1 gearbox on suspended robots