Turning tool for suspended mounting
The following table specifies the lifting tool required when fitting the robot in a
suspended position.
NoteArt. no.Description
Valid for
other
designs
than type
C:
3HAC034766-001Turning tool (includes lifting instruction)
Valid for all
types
3HAC048502-001Turning tool (includes lifting instruction)
Product manual - IRB 2600 385
3HAC035504-001 Revision: G
© Copyright 2009-2015 ABB. All rights reserved.
7 Reference information
7.7 Special tools
Continued
To Next Page
Loading...
