NoteAction
Guide pin, M12x150: 3HAC13056-2IRB 6700 - 200/2.60, IRB 6700 - 155/2.854
Guide pin, M12x200: 3HAC13056-4Fit two guide pins in opposite M12 holes
in the axis-3 gearbox.
Tip
Lubricate the guide pins with some grease
to make the upper arm slide better.
Always use guide pins in pairs.
xx1400000361
Guide pin, M16x150: 3HAC13120-2IRB 6700 - 300/2.70, IRB 6700 - 245/3.005
Guide pin, M16x200: 3HAC13120-3Fit two guide pins in opposite M16 holes
in the axis-3 gearbox.
Tip
Lubricate the guide pins with some grease
to make the upper arm slide better.
Always use guide pins in pairs.
xx1700000056
Securing the upper arm - IRB 6700 - 235/2.65, IRB 6700 - 205/2.80, IRB 6700 - 175/3.05, IRB 6700 -
150/3.20
NoteAction
CAUTION
The weight of the complete upper arm (in-
cluding the wrist) is
360 kg (IRB 6700 -235/2.65, -205/2.80, -
175/3.05, -150/3.20, -200/2.60, -155/2.85)
465 kg (IRB 6700 -300/2.70, -245/3.00)
All lifting accessories used must be sized
accordingly.
1
See Attaching lifting accessories to the
upper arm on page 228.
Attach the lifting accessories, if not already
fitted.
2
Continues on next page
414 Product manual - IRB 6700
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.5.5 Replacing the lower arm
Continued
To Next Page
Loading...
