NoteAction
xx1200001280
Lubricate the shaft and place it to the front ear.
Note
Foundry Plus:
Do not lubricate surfaces where Mercasol is ap-
plied.
9
Hydraulic pressure: 250 barPress the shaft in with the hydraulic press tool.10
Hydraulic pump 80 MPa:
3HAC13086-1
Hydraulic cylinder: 3HAC11731-1
Dismantle and mounting tool:
3HAC028920-001
xx1700002238
The item numbers refer to mark-
ings on the tools.
xx1300000782
Apply locking liquid (Loctite 2701) on the threads
of the screw, first entering the threads in the
frame.
11
Tightening torque: 180 Nm
xx1200001279
Secure the shaft with screw and washer.12
Continues on next page
Product manual - IRB 6700 439
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.5.5 Replacing the lower arm
Continued
To Next Page
Loading...
