Refitting the spherical roller bearing
Refitting the spherical roller bearing, link ear
NoteAction
Wipe clean all contact surfaces from resid-
ual grease.
1
xx1300000778
Refit the washer.2
Press tool J included in tool set Dismantle
and mounting tool
xx1300000839
Put the radial sealing on the Press tool J.
Note
Make sure that the sealing is turned accord-
ing to the figure.
3
xx1300000777
Use a plastic mallet or similar on the Press
tool J and refit the radial sealing.
4
Apply some grease on the surface for the
bearing.
5
Continues on next page
Product manual - IRB 6700 453
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.6.1 Replacing spherical roller bearing, link ear
Continued
To Next Page
Loading...
