NoteAction
VK cover, 90x12, 3HAA2166-28
xx1700002189
Refit the VK-cover.
Note
Temporarily remove the screw on the
cradle to let go of overpressure if the VK
covers are hard to fit.
2
Grease: 3HAA1001-294
xx1300000832
Unscrew both screws and refill grease from
the inner hole (See figure).
3
xx1300000833
Refit the screws.4
Wipe clean from residual grease.5
Remove the Distance tool.6
Continues on next page
490 Product manual - IRB 6700
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.6.3 Replacing the rear bearings on the balancing device
Continued
To Next Page
Loading...
