Lifting the robot with roundslings
NoteAction
xx1200001301
Fit lifting eyes to the outer holes on each
corner of the base.
1
xx1200001302
Make sure the roundslings do not rub
against any sharp edges.
Run roundslings through the lifting eyes
and fasten them in an overhead crane.
CAUTION
If the lifting eyes have sharp edges that
might damage the roundslings, lifting
shackles must be used to attach the
roundslings to the lifting eyes.
2
Roundsling, 2.5 m (4 pcs)
xx1300001572
Continues on next page
78 Product manual - IRB 6700
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.4.4.2 Lifting the robot with roundslings
Continued
To Next Page
Loading...
