If there is a risk of debris falling into the gear when opening the oil plug for
inspection, it is instead recommended to use the vent hole for oil level inspection:
xx2200002147
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section Standard
toolkit on page 628.
-Standard toolkit
Required consumables and wear parts
NoteArticle numberWear part
See Type of lubrication in gearboxes
on page 136.
-Lubricating oil
Used on oil plug. Always replace when
refitting oil plug.
3HAC061327-059O-ring, G 1/2"
Required documents
Document numberDocument name
3HAC042927-001Technical reference manual - Lubrication in gearboxes
Continues on next page
Product manual - IRB 6710 117
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.3.7 Inspecting the oil level in axis-1 gearbox
Continued
To Next Page
Loading...
