Floor-mounted robot: Inspecting the oil level in axis-1 gearbox
Use this procedure to inspect the oil level in the gearbox, when the robot is
floor-standing.
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safe-
guarded space.
1
WARNING
Handling gearbox oil involves several
safety risks, see Gearbox lubricants (oil or
grease) on page 29.
2
Make sure that the oil temperature is +25°C
± 10°C.
3
xx2200001795
Open the oil plug.
If there is a risk of debris falling into the
gear when opening the oil plug for inspec-
tion, it is instead recommended to use the
vent hole for oil level inspection:
xx2200002147
4
Continues on next page
118 Product manual - IRB 6710
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.3.7 Inspecting the oil level in axis-1 gearbox
Continued
To Next Page
Loading...
