Draining the axis-3 gearbox
Use this procedure to drain the gearbox.
NoteAction
xx2200002136
Jog the robot into position:
• Axis 1: no significance
• Axis 2: 0°
• Axis 3: +10°
• Axis 4: no significance
• Axis 5: no significance
• Axis 6: no significance
1
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safe-
guarded space.
2
WARNING
Handling gearbox oil involves several
safety risks, see Gearbox lubricants (oil or
grease) on page 29.
3
CAUTION
The gearbox can contain an excess of
pressure that can be hazardous. Open the
oil plug carefully in order to let the excess
pressure out.
4
xx2100002064
Remove the plug from the ventilation hole.
WARNING
Let the venting hole stay open during
draining and filling using the dispenser, to
avoid damaging vital parts in the gearbox.
5
Continues on next page
150 Product manual - IRB 6710
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.4.4 Changing the oil in axis-3 gearbox
Continued
To Next Page
Loading...
