NoteAction
xx2200001796
Remove the oil plug from the fill/level hole.
Note
The oil plug hole is opened to speed up the
drainage.
7
WARNING
Used oil is hazardous material and must
be disposed of in a safe way. See Decom-
missioning on page 615 for more informa-
tion.
8
O-ring, G 1/2": 3HAC061327-059Refit the oil plug for the drainage hole, with
a new o-ring.
9
Tightening torque: 24 Nm.
xx2100002095
Filling oil into the axis-4 gearbox
Use this procedure to refill the gearbox with oil.
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safe-
guarded space.
1
Continues on next page
156 Product manual - IRB 6710
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.4.5 Changing the oil in axis-4 gearbox
Continued
To Next Page
Loading...
