NoteAction
WARNING
Handling gearbox oil involves several
safety risks, see Gearbox lubricants (oil or
grease) on page 29.
2
xx2200001796
Open the fill/level plug.3
Type of oil and total amount is detailed in
Technical reference manual - Lubrication
in gearboxes.
Refill the gearbox with oil.
Note
The amount of oil to be filled depends on
the amount previously being drained.
4
Required oil level is: 0-10 mm below oil
plug hole
Inspect the oil level.
CAUTION
The oil level sinks when the oil fills all cav-
ities in the gearbox. Wait until the oil stops
sinking, before measuring the oil level.
5
See Inspecting the oil level in axis-4 gear-
box on page 128.
O-ring, G 1/2": 3HAC061327-059Refit the oil plug with a new o-ring.6
Tightening torque: 24 Nm.
xx2200001796
Continues on next page
Product manual - IRB 6710 157
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.4.5 Changing the oil in axis-4 gearbox
Continued
To Next Page
Loading...
