NoteAction
Tightening torque: standard torque 300 Nm
(Tightening torque for lubricated screws
(Molykote, Gleitmo or equivalent) with allen
head screws on page 626).
Remove the two guide pins and refit remain-
ing attachment screws.
Tighten the remaining, accessible attach-
ment screws.
16
xx2200001403
xx2200001405
xx2200001404
Continues on next page
Product manual - IRB 6710 463
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.8.1 Replacing the axis-1 gearbox
Continued
To Next Page
Loading...
