Combined warning label "Do not dismantle" and "Stored energy", 3HAC3981-1F
Instruction label for lifting of robot, 3HAC039840-001G
Warning label "Tip risk when loosening bolts", 3HAC9191-1H
Instruction label "Before dismantling see product manual", 3HAC4591-1J
Label, calibration, 3HAC024307-001K
Warning label "Crush", 3HAC4517-1L
Information labels at gearboxes and at robot base, specifying which oil is used
in gearboxes
N
ABB LogotypeO
Label for marking of axis 7, 3HAC028979-001 (option)P
Required tools and equipment
Visual inspection, no tools are required.
Inspecting, labels
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working area.
1
Inspect the labels, located as shown in the figures.2
Article numbers for the labels and
plate set is specified in Spare
parts on page 393.
Replace any missing or damaged labels.3
Product manual - IRB 760 115
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
3 Maintenance
3.3.6 Inspecting the information labels
Continued
To Next Page
Loading...
