ABB IRB 760 Series - Lifting robot with fork lift

2.3 On-site installation
2.3.1 Lifting robot with fork lift
General
The robot may be moved using a fork lift, provided that available special aids are
used.
This section describes how to attach the fork lift equipment to the robot.
Attachment points on robot
The attachment points for the fork lift equipment are shown in this figure.
xx1000001160
Attachment points, adapterA
Attachment points, fork lift pocket (horizontal attachment screws)B
Attachment points, fork lift pocket (vertical attachment screws)C
Required equipment
NoteArt. no.Equipment, etc.
See figure Fork lift set, 3HAC023044-001
on page 57.
3HAC023044-001Fork lift set, incl. all required
hardware
Content is defined in section Standard
tools on page 389.
-Standard toolkit
Continues on next page
56 Product manual - IRB 760
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.1 Lifting robot with fork lift