ABB IRB 760 Series - Inspecting, Oil Level Gearbox Axis 6

3.3.3 Inspecting, oil level gearbox axis 6
Location of gearbox
The axis 6 gearbox is located in the tilthouse unit as shown in this figure.
xx1000001236
Oil plug, fillingA
Oil plug, drainingB
Gearbox, axis 6C
Required equipment
NoteArt. no.Equipment
Kyodo Yushi TMO 1503HAC0860-1Lubricating oil
Content is defined in section
Standard tools on page 389.
-Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Inspection, oil level axis-6 gearbox
Use this procedure to inspect the oil level in the axis-6 gearbox.
NoteAction
WARNING
Handling gearbox oil involves several safety risks.
Before proceeding, please read the safety informa-
tion in the section Safety risks during work with
gearbox lubricants (oil or grease) on page 36.
1
Continues on next page
Product manual - IRB 760 107
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
3 Maintenance
3.3.3 Inspecting, oil level gearbox axis 6