ABB IRB 760 Series - Replacement of Linkage - Link

4.4.6 Replacement of linkage - link
Overview
The linkage consists of three basic parts - upper link arm, lower link arm and link.
The procedures below details how to remove and refit the link.
How to replace the upper link arm and lower link arm, see:
• Replacing linkage - upper link arm on page 228.
• Replacing the linkage - lower link arm on page 235.
Location of link
The link is located as shown in the figure.
xx1000001083
Continues on next page
242 Product manual - IRB 760
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.4.6 Replacement of linkage - link