ABB IRB 760 Series - Replacement of Parallel Arm

4.4.9 Replacement of parallel arm
Location of parallel arm
The parallel arm is located as shown in the figure below.
xx1000001381
Required equipment
NoteArt.no.Equipment, etc.
For spare part no. see:
• Spare parts on
page 393.
Parallel arm
D=120 mm, T=12 mm3HAA2166-23VK cover
D=35 mm, T=8 mm3HAA2166-18VK cover
3HAB9408-1Bearing grease
Mercasol 3110 Waxcoat3HAC034903-001Rust preventive
Continues on next page
Product manual - IRB 760 271
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.4.9 Replacement of parallel arm