NoteAction
Detailed in section Replacing linkage -
upper link arm on page 228
Remove the upper link arm and lower link
arm.
4
Detailed in section Replacing the linkage
- lower link arm on page 235
xx1000001266
Remove screw and washer in the hole for
filling grease.
5
xx1000001267
Use compressed air to remove the VK cov-
er. Blow with a very low air pressure into
the hole for filling grease.
CAUTION
Only a very low air pressure is needed!
6
Put one hand with some paper on top of
the VK cover in order to catch it when re-
leased.
Shown in Cut away view of the assembly
of the link on page 243.
Remove the small VK cover.7
Continues on next page
246 Product manual - IRB 760
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.4.6 Replacement of linkage - link
Continued
To Next Page
Loading...
