NoteAction
Art no. is specified in Required equip-
ment on page 316.
xx1000001390
Make sure the two o-rings on the circumfer-
ence of the gearbox are seated properly in
their respective groove. Lubricate them with
grease.
2
xx1000001392
Make sure the small o-ring around the oil hole
is fitted properly!
3
Continues on next page
Product manual - IRB 760 323
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.7.1 Replacing the axis 1 gearbox
Continued
To Next Page
Loading...
