ABB IRB 760 Series - Page 391

Article no.QtyDescription
3HAC15560-1Lifting accessory, base and gear 1
3HAC023240-001Lifting accessory, gearbox ax 2-3
Special tools
This table specifies the special tools required during several of the service
procedures. The tools can be ordered separatly and are also specied directly in
concerned instructions.
Article no.QtyDescription
3HAC022637-0012 pcsGuide pins M12x130
3HAC039277-002Press tool, premounting bearing
3HAC039993-002Press tool, mounting axis 6
3HAC038174-002Fitting/Removing tool, shafts
3HAC039304-002Press tool link (bearing and shaft)
3HAC039305-001Assembly tool, linkage
StandardKM10 socket
3HAC039302-002Press tool link (bearing and sealing)
3HAC023092-001Press tool, lower arm
3HAC5021-1Fitting/Removing tool (Parallel rod)
3HAC039277-006Shims T= 2 mm
3HAC038147-031Shims T= 2.5 mm
3HAC5281-1Auxiliary shaft
3HAC039296-001Lubrication tool, spherical roller bearing
3HAC039571-002Lubrication tool, conical roller bearing
3HAC023132-001Pinion crank RV 450E
3HAC023760-001Bits extension
3HAC15535-1Support base
-Lock screw M16x55
3HAC14446-1Guide sleeves
Product manual - IRB 760 391
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
7 Reference information
7.7 Special tools
Continued