NoteAction
xx0500002278
Strap up axis 2 motor cable on the adapter.3
• A: Strap, velcro
CAUTION
The fork lift pocket weighs 60 kg!
4
Always use original screws (or replace-
ments of equivalent quality: M16, qual-
ity 12.9)!
Secure the longer fork lift pocket to the adapter
and frame with four of the horizontal attach-
ment screws and washers.
Note
The screws, which are attached horizontally
and vertically, are identical. However, they are
tightened with different torque!
5
Attachment points on the robot are
shown in figure Attachment points on
robot on page 56.
xx0500002279
A Horizontal attachment screws, 4
pcs, M16 x 60. Tightening torque:
60 Nm.
B Adapter
Continues on next page
Product manual - IRB 760 59
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.1 Lifting robot with fork lift
Continued
To Next Page
Loading...
