2 Installation and commissioning
2.5.1. Lifting robot with fork lift
3HAC022033-001 Revision: K74
© Copyright 2004-2011 ABB. All rights reserved.
Fork lift set, 3HAC0604-1
The fork lift set, 3HAC0604-1, is fitted to the robot as shown in the figure below.
xx0200000379
Lifting robot with fork lift
This section details how to secure the fork lift set to the robot in order to lift and move the
robot using the fork lift ONLY!
A Fork lift pocket (2 pcs, different from each other)
B Spacer (2 pcs)
C Horizontal attachment screws (4 pcs / fork lift pocket)
D Vertical attachment screws (2 pcs)
E Securing screw, used for IRB 6650S
Action Note
1. If a cooling fan for the axis 1 motor is used, it
must be removed in order to use the fork lift
device!
Continued
Continues on next page
To Next Page
Loading...
Need help?
General
