PCS100 UPS-I User Manual 3
—
Document Information
Copyright notice
The information in this manual is subject to change without notice. This manual and parts thereof must not be re-
produced or copied, or disclosed to third parties, nor used for any unauthorized purpose without written permis-
sion from ABB Ltd. The hardware and software described in this manual are provided under a license and may be
used, copied, or disclosed only in accordance with the terms of such license.
Document identification
Ownership: ABB Ltd., Power Conditioning Products
Document number: 2UCD120000E001
Issue date: 3/31/2022
Revision: Rev I
Contact information
Address: ABB Ltd. 111 Main North Road, Napier, New Zealand.
Website: https://new.abb.com/ups
This Document
This manual contains information regarding:
– the general functions of the PCS100 UPS-I
– the component enclosures making up the PCS100 UPS-I
– operation of the PCS100 UPS-I
– the user interface (GDM)
– control and adjustments of the PCS100 UPS-I
Usage
This manual should be used during operation and adjustment of the PCS100 UPS-I. It should be referenced for:
– commissioning the PCS100 UPS-I
– servicing
– operation and adjustment of the PCS100 UPS-I
Who Should Read This Manual?
This manual is intended for:
– installation personnel
– service personnel
– maintenance personnel
– operators
Prerequisites
An installation/repair/operator person working with the PCS100 UPS-I must:
– be trained by ABB and have electrical operational and safety knowledge
have sufficient training to operate in an accidental touch safe service environment
To Next Page
Loading...
