80 PCS100 UPS-I User Manual
Table 10-1: GDM Menu Index Table
10.3 Parameter Listing
Note:
The parameter adjustment ranges defined in the following section are not necessarily achievable due to system
constraints.
Note:
Some parameter visibility depends on the login level of the user.
NOTICE – Trained Operators
All operations on the PCS100 UPS-I must only be carried out by a trained Operator familiar with the
contents of this manual. Hazardous conditions could arise from incorrect adjustment.
The menu contains general system parameters
To enable or disable access to the Operator menu or the Tech menu
Enter “159” to access the Operator menu
To enter the date and time
Restarts all functions within two minutes
Select “True” to reboot the PCS100 UPS-I. The parameter will automatically set back to
“False” once the PCS100 UPS-I has rebooted. Event 209 will be displayed in the event log.
Clears the power quality events recorded in the Summary Page. See Section 7.1.7.
To Next Page
Loading...
