ABB PCS100 UPS-I - Menu GDM A00 Display

PCS100 UPS-I User Manual 95
10.3.11 Menu GDM A00 Display
GDM A00 Display
The menu contains parameters to setup the graphic display module
Parameter:
A31 GDM Control Enable
Function:
Enables or disables the local Start, Stop, Reset control
Range:
True / False
Factory
Setting:
True
Access:
Operator
Note:
When disabled (false) the Start (I), Stop (0) and Reset button will not be displayed in the
GDM.
Parameter:
A62 Screen Saver Time
Function:
Sets the time for the screen saver to activate
Range:
0 min to 999 min
Factory
Setting:
15 min
Access:
Operator
Name:
A63 SSH Port Enable
Function:
Enables SSH access.
Range:
True / False
Factory
Setting:
True
Access:
Operator
Name:
A64 Firmware Upload Enable
Function:
Enables firmware uploads
Range:
True / False
Factory
Setting:
False
Access:
Operator
Table 10-12: Menu GDM A00 Display