ABB PCS100 UPS-I - Menu 300 Product Revision

PCS100 UPS-I User Manual 85
10.3.4 Menu 300 Product Revision
300 Product Revision
This menu displays the various PCS100 UPS-I software numbers and revisions.
Parameter:
311 System Product
Function:
Displays the product main software number
Range:
For PCS100 UPS-Is this is “7301”
Parameter:
312 System Revision
Function:
Displays the main system software revision
Range:
Products relating to this manual should be R2F revision or later.
Parameter:
330 SCM Boot Product
Function:
Displays the SCM (system configuration Module) boot software name
Range:
The PCS100 UPS-I SCM Boot SW is “7605-010”
Parameter:
311 SCM Boot Revision
Function:
Displays the SCM (System Configuration Module) boot software revision
Parameter:
332 SCM Product
Function:
Displays the SCM (System Configuration Module) software number
Range:
For PCS100 UPS-I SCM this is “7600-010”
Parameter:
333 SCM Revision
Function:
Displays the SCM (System Configuration Module) software revision
Parameter:
341 CGI Revision
Function:
Displays the CGI software revision
Parameter:
352 Modbus Revision
Function:
Displays the Modbus software revision
Parameter:
353 NTP Revision
Function:
Displays the NTP (Network Time Protocol) client software revision
Table 10-5: Menu 300 Product Revision parameters