ABB Pulsar Edge - Accessing and Operating the Controller; Craft Port and USB Access

Page 25
© Copyright 2021 ABB. All rights reserved.
Craft Port
A GUI very similar to the interface provided by a LAN connection can be obtained locally through the
RS232 or USB Craft port using EasyView 2.0, EV2. Once, EV2 has established the connection and is up
and running the interface is the same as that provided over the LAN connection. The following
describes connecting to the RS232 or USB Craft port using EasyView 2.0. To access the system using
the RS232 or USB Craft Port, follow the following basic procedures.
Step Action
earth ground.
1
Down load the latest copy of EasyView 2.0 from the corporate website at abbpowerconversion.com
click the “Next >” button.
on
rog