Page 85
© Copyright 2021 ABB. All rights reserved.
* These fields are automatically assigned when using the DHCP server or Client mode of operation and
are generally required when utilizing a Static IP address setting.
The controller provides configurable community strings for SNMP traps and Sets and Gets
HTTP
HTTP (hypertext transfer protocol) is the foundation protocol of the World Wide Web (www) and can
be used in any client-server application involving hypertext. HTTP makes use of TCP (transmission
control protocol) for client to server connection and IP (internet protocol) for internetworking. The
Pulsar Edge’s standard HTTP protocol web pages provide integrated site information with an
enhanced graphical user interface. The on- board HTTP web pages server is password protected for
read/write privilege. Further access restrictions can be implemented using the software read/write
disable capabilities. The Pulsar Edge has a configurable timeout for connections that remain idle more
ho o
DNS *
network.
(Server)
on
o
Strings
Strings
capability.
To Next Page
Loading...
Need help?
General
