ABB REG316 4 Series - Page 452

ABB Switzerland Ltd REG 316*4 1MRB520049-Uen / Rev. E
5-8
When the operator program is started, it searches for the con-
figuration file ‘re*.cfg’ which contains the settings it needs.
Example for a configuration file ‘re2.cfg’:
;program parameters: (* 13-Mar-1998 16:36 *)
;RETYP={REG216, REC216, RET316, REC316, REL316}
;LANG={ENG, DEU, FRA}
;COLOR={BW80,RGB}
;COMT={RDM,SRIO,TC57,SPA,MDM}
;BAUD={1200,2400,4800,9600,19200}
;SLVE={10...890} (Default slave No.)
;TNR={T...., P.....}
;MPAR=AT&FE0
;
RETYP=REC316
LANG=DEU
COLOR=RGB
EVEDATA=
ONHOOK=~~~~~+++~~~~~ATH0
CPUTYPE=PENTIUM
SLVE=2
SRIO_ADDR=950
COMT=TC57
TNR=T581625
MPAR=AT&D0E0M0S0=0
PORT=1
BAUD=9600
BAUD_XX=BAUD96
The following parameters are of consequence in order to com-
municate with the RE. 316*4 via the interface on the front of the
unit:
RETYP=
LANG=
COMT=TC57
PORT=
BAUD_XX=