ABB Switzerland Ltd REG 316*4 1MRB520049-Uen / Rev. E
5-92
Windows 3.xx :
ITEM “Text” COMMAND “Filename.pif”.
The text entered in the first pair of inverted commas appears in
the ‘HMI’ menu. Windows 3.xx uses *.pif files in which the char-
acteristics of the DOS program are entered. Start the PIF editor
after saving ‘MMKShell.mnu’.
The following entries have to be made:
Program file name: Path to the HMI file pcgc91.exe, e.g.
C:\MMK\PCGC91
Program title: Name of the window in which the HMI is
running
Program parameters: Write the ‘Default’ is replaced by the de-
sired name for the *.cfg file.
Save the *.pif file.
Fig. 5.66 Pif editor
To Next Page
Loading...
