ABB Relion REC615 - CTRL.DCXSWI8 Disconnector Control (8); Sensors and Monitoring Functions; LD0.SSCBR1 Circuit-Breaker Condition Monitoring (1); LD0.SSCBR2 Circuit-Breaker Condition Monitoring (2)

2.3.2.9 CTRL.DCXSWI8 Disconnector control (8)
Table 15: CTRL.DCXSWI8 Disconnector control (8)
IEC 61850 name SA name Description Values
CTRL.DCCILO8
.EnaCls.stVal ENA_CLOSE Close enabled 1=Enabled
.EnaOpn.stVal ENA_OPEN Open enabled 1=Enabled
.ItlByPss.stVal ITL_BYPASS Interlocking bypass 1=Bypassed
CTRL.DCCSWI8
.Pos.stSeld SELECTED CB selected 1=Selected
CTRL.DCXSWI8
.BlkCls.stVal BLK_CLOSE Close blocked 1=Blocked
.BlkOpn.stVal BLK_OPEN Open blocked 1=Blocked
2.3.3 Sensors and monitoring functions
2.3.3.1 LD0.SSCBR1 Circuit-breaker condition monitoring (1)
Table 16: LD0.SSCBR1 Circuit-breaker condition monitoring (1)
IEC 61850 name
SA name Description Values
.APwrAlm.stVal IPOW_ALM Iyt alarm 1=Alarm
.APwrLO.stVal IPOW_LO Iyt lockout 1=Lockout
.CBLifAlm.stVal CB_LIFE_ALM CB lifetime alarm 1=Alarm
.ClsAlm.stVal TRV_T_CL_ALM Cls travel time alarm 1=Alarm
.LonTmAlm.stVal MON_ALM CB inactive alarm 1=Alarm
.OpnAlm.stVal TRV_T_OP_ALM Cls travel time alarm 1=Alarm
.OpNumAlm.stVal OPR_ALM CB operations alarm 1=Alarm
.OpNumLO.stVal OPR_LO CB operations lockout 1=Lockout
.PresAlm.stVal PRES_ALM Low pressure alarm 1=Alarm
.PresLO.stVal PRES_LO Low pressure lockout 1=Lockout
.SprChaAlm.stVal SPR_CHR_ALM Spring charge time alarm 1=Alarm
2.3.3.2 LD0.SSCBR2 Circuit-breaker condition monitoring (2)
Table 17: LD0.SSCBR2 Circuit-breaker condition monitoring (2)
IEC 61850 name
SA name Description Values
.APwrAlm.stVal IPOW_ALM Iyt alarm 1=Alarm
.APwrLO.stVal IPOW_LO Iyt lockout 1=Lockout
.CBLifAlm.stVal CB_LIFE_ALM CB lifetime alarm 1=Alarm
.ClsAlm.stVal TRV_T_CL_ALM Cls travel time alarm 1=Alarm
Table continues on next page
Section 2 1MRS757807 B
DNP3 data mappings
22 Remote Monitoring and Control REC615
Point List Manual