ABB Relion REC615 - LD0.PHSVPR2 Voltage Presence Supervision (2); Metering and Measurand Functions; LD0.CMMXU1 Phase Current Limit Supervision (1); LD0.RESCMMXU1 Residual Current Limit Supervision (1)

IEC 61850 name SA name Description Values
.VDea.stVal U_DEAD Low voltage presence 1=Low voltage
.VDeaPhsA.stVal U_A_AB_DEAD Low phsA or phsAB voltage 1=Low voltage
.VDeaPhsB.stVal U_B_BC_DEAD Low phsB or phsBC voltage 1=Low voltage
.VDeaPhsC.stVal U_C_CA_DEAD Low phsC or phsCA voltage 1=Low voltage
2.3.3.7 LD0.PHSVPR2 Voltage presence supervision (2)
Table 22: LD0.PHSVPR2 Voltage presence supervision (2)
IEC 61850 name SA name Description Values
LD0.PHSVPR2
.VLiv.stVal U_LIVE High voltage presence 1=High voltage
.VLivPhsA.stVal U_A_AB_LIVE High phsA or phsAB voltage 1=High voltage
.VLivPhsB.stVal U_B_BC_LIVE High phsB or phsBC voltage 1=High voltage
.VLivPhsC.stVal U_C_CA_LIVE High phsC or phsCA voltage 1=High voltage
.VDea.stVal U_DEAD Low voltage presence 1=Low voltage
.VDeaPhsA.stVal U_A_AB_DEAD Low phsA or phsAB voltage 1=Low voltage
.VDeaPhsB.stVal U_B_BC_DEAD Low phsB or phsBC voltage 1=Low voltage
.VDeaPhsC.stVal U_C_CA_DEAD Low phsC or phsCA voltage 1=Low voltage
2.3.4 Metering and measurand functions
2.3.4.1 LD0.CMMXU1 Phase current limit supervision (1)
Table 23: LD0.CMMXU1 Phase current limit supervision (1)
IEC 61850 name
SA name Description Values
LD0.CMMXU1
.HiAlm.stVal HIGH_ALARM High alarm 1=Alarm
.HiWrn.stVal HIGH_WARN High warning 1=Warning
.LoAlm.stVal LOW_ALARM Low alarm 1=Alarm
.LoWrn.stVal LOW_WARN Low warning 1=Warning
2.3.4.2 LD0.RESCMMXU1 Residual current limit supervision (1)
Table 24: LD0.RESCMMXU1 Residual current limit supervision (1)
IEC 61850 name
SA name Description Values
LD0.RESCMMXU1
.HiAlm.stVal HIGH_ALARM High alarm 1=Alarm
.HiWrn.stVal HIGH_WARN High warning 1=Warning
Section 2 1MRS757807 B
DNP3 data mappings
24 Remote Monitoring and Control REC615
Point List Manual