ABB Relion REC615 - LD0.SPCGGIO1 Multipurpose Binary Outputs (1); LD0.SPCGGIO2 Multipurpose Binary Outputs (2)

2.4.6.3 LD0.SPCGGIO1 Multipurpose binary outputs (1)
The binary outputs can be configured either as pulse- or persistent-type outputs. Pulse-
type outputs are triggered with the write value "1". Persistent-type outputs can be
written with both values "1" and "0" values. The setting mode "toggled" for local
operation corresponds to "persistent" for remote operation.
Table 113: LD0.SPCGGIO1 Multipurpose binary outputs (1)
IEC 61850 name SA name Description Type
LD0.SPCGGIO1
.SPCSO1.Oper.ctlVal - Output 1 control On/Off
.SPCSO2.Oper.ctlVal - Output 2 control On/Off
.SPCSO3.Oper.ctlVal - Output 3 control On/Off
.SPCSO4.Oper.ctlVal - Output 4 control On/Off
.SPCSO5.Oper.ctlVal - Output 5 control On/Off
.SPCSO6.Oper.ctlVal - Output 6 control On/Off
.SPCSO7.Oper.ctlVal - Output 7 control On/Off
.SPCSO8.Oper.ctlVal - Output 8 control On/Off
.SPCSO9.Oper.ctlVal - Output 9 control On/Off
.SPCSO10.Oper.ctlVal - Output 10 control On/Off
.SPCSO11.Oper.ctlVal - Output 11 control On/Off
.SPCSO12.Oper.ctlVal - Output 12 control On/Off
.SPCSO13.Oper.ctlVal - Output 13 control On/Off
.SPCSO14.Oper.ctlVal - Output 14 control On/Off
.SPCSO15.Oper.ctlVal - Output 15 control On/Off
.SPCSO16.Oper.ctlVal - Output 16 control On/Off
2.4.6.4 LD0.SPCGGIO2 Multipurpose binary outputs (2)
The binary outputs can be configured either as pulse- or persistent-type outputs. Pulse-
type outputs are triggered with the write value "1". Persistent-type outputs can be
written with both values "1" and "0". The setting mode "toggled" for local
operation corresponds to "persistent" for remote operation.
Table 114: LD0.SPCGGIO2 Multipurpose binary outputs (2)
IEC 61850 name
SA name Description Type
LD0.SPCGGIO2
.SPCSO1.Oper.ctlVal - Output 1 control On/Off
.SPCSO2.Oper.ctlVal - Output 2 control On/Off
.SPCSO3.Oper.ctlVal - Output 3 control On/Off
.SPCSO4.Oper.ctlVal - Output 4 control On/Off
.SPCSO5.Oper.ctlVal - Output 5 control On/Off
Table continues on next page
Section 2 1MRS757807 B
DNP3 data mappings
48 Remote Monitoring and Control REC615
Point List Manual