Metering and measurand functions.............................................24
LD0.CMMXU1 Phase current limit supervision (1).................24
LD0.RESCMMXU1 Residual current limit supervision
(1)...........................................................................................24
LD0.VMMXU1 Three-phase voltage limit supervision
(1)...........................................................................................25
LD0.VMMXU2 Three-phase voltage limit supervision
(2)...........................................................................................25
Power quality functions................................................................25
LD0.CMHAI1 Current total demand distortion (1)..................25
LD0.VMHAI1 Voltage total harmonic distortion (1).................25
LD0.PHQVVR1 Voltage variation signals (1).........................26
LD0.VSQVUB1 Voltage unbalance detection (1)...................26
Protection functions.....................................................................26
LD0.PHLPTOC1 Phase overcurrent protection, low
stage (1) ................................................................................26
LD0.PHHPTOC1 Phase overcurrent protection, high
stage (1).................................................................................26
LD0.PHIPTOC1 Phase overcurrent protection,
instantaneous stage (1)..........................................................27
LD0.DPHLPDOC1 Three-phase directional overcurrent
protection, low stage (1).........................................................27
LD0.DPHLPDOC2 Three-phase directional overcurrent
protection, low stage (2).........................................................27
LD0.DPHHPDOC1 Three-phase directional overcurrent
protection, high stage (1)........................................................27
LD0.EFLPTOC1 Non-directional earth-fault and
sensitive earth-fault protection, low stage (1).........................28
LD0.EFHPTOC1 Non-directional earth-fault and
sensitive earth-fault protection, high stage (1).......................28
LD0.EFIPTOC1 Non-directional earth-fault and sensitive
earth-fault protection, instantaneous stage (1).......................28
LD0.DEFLPDEF1 Directional earth-fault protection, low
stage (1).................................................................................28
LD0.DEFLPDEF2 Directional earth-fault protection, low
stage (2).................................................................................29
LD0.DEFHPDEF1 Directional earth-fault protection,
high stage (1).........................................................................29
LD0.INTRPTEF1 Intermittent earth-fault protection (1)..........29
LD0.EFPADM1 Admittance-based earth-fault protection
(1)...........................................................................................29
LD0.EFPADM2 Admittance-based earth-fault protection
(2)...........................................................................................29
LD0.EFPADM3 Admittance-based earth-fault protection
(3)...........................................................................................30
Table of contents
2 Remote Monitoring and Control REC615
Point List Manual
To Next Page
Loading...
Need help?
General
