ABB STT04 - Page 159

TBN480 CONDUCTIVITY TRANSMITTER
CREATE/MODIFY CONFIGURATION
J - 3
Refer to Smart Conductivity Transmitter Series
TBN480 instruction for description.
Refer to Smart Conductivity Transmitter Series
TBN480 instruction for description.
Displays analyzer ranges.
Select proper temperature compensation input.
Refer to Smart Conductivity Transmitter Series
TBN480 instruction for description.
Select a temperature compensation effect. Use the
down arrow key to view more selections. Refer to
Smart Conductivity Transmitter Series TBN480
instruction for description.
Enter a value between 0 and 32. Refer to the Smart
Conductivity Transmitter Series TBN480 instruc-
tion for description.
Key Display Comments
ENTER
SENSOR GROUP
→ A
B
C
ENTER
RANGE JUMPER
HIGH
MEDIUM
→ LOW
ENTER
ANALYZER RANGE
0-9990 µS/cm
0−999 µS/cm
ENTER
TEMP COMP
INPUT
→ MANUAL
3.0KΩ BALCO
ENTER
TEMP COMP TYPE
→ STANDARD
0-15% NaOH
0-20% NaCl
ENTER
DAMPING:
(0-32 SEC)
_nn.nn