INTRODUCTION
SPECIFICATIONS
1 - 4
SPECIFICATIONS
Table 1-4 lists the performance specifications of the STT04 terminal.
OPTIONS AND ACCESSORIES
The STT04 has a nomenclature option for a carrying case, refer to
Table 1-2 for nomenclature details. Spare parts are recommended to
be kept on hand to minimize down time, refer to REPAIR/REPLACE-
MENT AND UPGRADE in Section 6 for spare parts information.
Table 1-4. STT04 Terminal Specifications
Property Characteristic/ Value
Display format
Type
Number of rows
Characters per row
LCD
4
20
Configuration storage
capacity
100 configurations
Keyboard type Tactile feedback embossed membrane; 32 keys
Clip Leads Cable length 1.8 m (5 ft 10 in.)
Temperature limits
Operating
Storage
-10° to 60°C (14° to 140°F)
-20° to 70°C (-4° to 158°F)
Humidity limits 95%, noncondensing
Batteries
Type
Run time
Charging time
AA NiCd rechargeable
6 days (approximately)
2.8 hours
Weight 635 g (22.4 oz)
Dimensions (HxWxD) 200 x 108 x 44 mm (7.875 x 4.25 x 1.75 in)
Case material Plastic, polycarbonate (Lexan 940
®
or
equivalent)
Agency certifications
1
Factory Mutual (FM) approval and Canadian
Standards Association (CSA) certifications in the
following categories:
Nonincendive:
Class I; Division 2; Groups A, B, C, D
Intrinsically Safe:
Class I; Division 1; Groups A, B, C, D
NOTE:
1. Hazardous location approvals for use in flammable atmospheres are for ambient conditions of
-25° to 40°C (-13° to 104°F), 86 to 106 kPa (12.5 to 15.7 psi) with a maximum oxygen concentration
of 21 percent.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
To Next Page
Loading...
