ABB STT04 - Appendix Q - 600 T & 600 T en Pressure Transmitter; Introduction; Create;Modify Configuration

INTRODUCTION
Q - 13
APPENDIX Q - 600T & 600T EN PRESSURE TRANSMITTER
INTRODUCTION
This appendix covers the configuration and calibration functions of
the Type 600T EN Pressure Transmitter.
Refer to OPERATING PROCEDURES in Section 4 for information on
the following functions:
CREATE/MODIFY CONFIGURATION
A configuration can be created off-line, without a connected field
device. Refer to Figure Q-1 for an overview of the configuration
function. The following table details the configuration process.
• Send configurations. • Select configurations.
• Get configurations. • Erase configurations.
• View configurations. • Operational functions.
Figure Q-1. Configuration Flowchart (600T & 600T EN)