INTRODUCTION
N - 1
APPENDIX N - TB82 TRANSMITTER
INTRODUCTION
This appendix covers the configuration, calibration and special fea-
ture functions of the TB82 transmitter. Table N-1 lists problem codes
and Table N-2 lists error codes of the TB82 transmitter.
Refer to OPERATING PROCEDURES in Section 4 for information on
the following functions:
CREATE/MODIFY CONFIGURATION
A configuration can be created offline, without a connected field
device. Refer to Figure N-1 for an overview of the configuration
function. The following table details the configuration process.
This procedure covers pH transmitters. Any differences between
other TBI devices will be noted in the Comments column.
• Send configurations. • Select configurations.
• Get configurations. • Erase configurations.
• View configurations. • Operational functions.
Figure N-1. Configuration Flowchart (TB82)
T02394A
ID TAG
ENTER
MESSAGE
TRANSMITTER
TYPE
ENTER
DATE
ENTER
TEMPERATURE
(pH ONLY)
SELECT
MODE
DAMPING
DEVICE
TYPE
ENTER
DESCRIPTOR
TEMPERATURE
COMPENSATION
TYPE (pH ONLY)
ENTER LOWER
AND UPPER
RANGE VALUE
CONFIGURATION
NAME
SELECT
OUTPUT
TYPE
SAVE
CONFIGURATION
C
O
N
F
I
G
U
R
E
To Next Page
Loading...
