TBN581 (ORP/pION) TRANSMITTER
CREATE/MODIFY CONFIGURATION
L - 2
Key Display Comments
Select NEW. To modify an existing configuration,
select MODIFY. The screen sequence is the same,
however, the MODIFY screens appear with the val-
ues and cursor positions as originally configured.
Select ABB FSK as device type.
Use the down arrow key and select TB581 ORP.
Enter a name for the configuration ID tag using up to
14 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
Select ANALOG.
CONFIG
CONFIGURATION
→ NEW
MODIFY
ERASE
ENTER
DEVICE TYPE
→ ABB FSK
HART
ENTER
TRANSMITTER TYPE
BCN EQN
AVS TB480 cond
TB580 pH → TB581 ORP
ENTER
STT04 CONFIGURATION
[]
←PREVIOUS NEXT→
ENTER
SELECT MODE:
→ ANALOG
DIGITAL
To Next Page
Loading...
