TZID/AZH POSITIONER
CREATE/MODIFY CONFIGURATION
M - 2
Key Display Comments
Select NEW to create a configuration. To modify an
existing configuration, select MODIFY. The screen
sequence is the same, however, the MODIFY
screens will appear with the values and arrow posi-
tions as they were originally configured.
Select HART.
Select TZID/AZH.
Enter a name for the configuration ID tag using up to
8 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
Select ANALOG.
NOTE: The DIGITAL selection should only be made
when using the device in multidrop mode. A CHAN-
NEL # prompt appears when DIGITAL is selected.
Enter up to 32 characters (ASCII) of descriptive text
in this field.
CONFIG
CONFIGURATION
→ NEW
MODIFY
ERASE
ENTER
DEVICE TYPE
ABB FSK
→ HART
ENTER
TRANSMITTER TYPE
TB82 pH TB82 ORP
TB82 pION TB82 CONC
→ TZID/AZH HART UNIV
ENTER
STT04 CONFIGURATION
[]
←PREVIOUS NEXT→
ENTER
SELECT MODE:
→ ANALOG
DIGITAL
ENTER
TAG NUMBER
←PREVIOUS NEXT→
To Next Page
Loading...
