ABB STT04 - APPENDIX - 600 T & 600 TEN PRESSURE TRANSMITTER; CREATE;MODIFY CONFIGURATION

ADDENDUM
4
APPENDIX - 600T & 600TEN PRESSURE TRANSMITTER
INTRODUCTION
This appendix covers the confi
g
uration and calibration functions of the T
y
pe 600T EN Pressure Transmitter.
Refer to SECTION 4 - OPERATING PROCEDURES for information on the followin
g
functions:
CREATE/MODIFY CONFIGURATION
A confi
g
uration can be created off-line, without a connected field device. Refer to Fi
g
ure 1 for an overview of the
confi
g
uration function. The followin
g
table details the confi
g
uration process.
• Send configurations. • Select configurations.
• Get configurations. • Erase configurations.
• View configurations. • Operational functions.
Figure 1. Configuration Flowchart (600T & 600T EN)