9-10 Art: 714371-00E Rev. Date: 06-Aug-12
PREFERENCE WINDOW: for barCodes
Option Description Default Comments
ID BARCODES * The user can select any or all of the following as valid barcode
formats for both the operator and patient ID:
•I2of5
•Code128
•Codabar
•Code93
•Code39
•EAN8,EAN13
All barcode types Barcode type Code 128 will support USS 128 and UCC/EAN
128, but not ISBT 128.
I2 OF 5 OPTIONS No Check Digit
USS Check Digit
OPCC Check Digit
USS Check Digit
CODE 39 OPTIONS Check Digit or No Check Digit
Alphanumeric or Full ASCII
Check Digit, Full ASCII
TRUNCATE DIGITS User can select how to truncate digits from a scanned operator
and/or patient ID:
First: enter number of leading characters to be stripped from
the barcode.
Last: enter number of trailing characters to be stripped from
the barcode.
No truncation The analyzer will accept up to 15 characters for operator and
patient IDs.
* Note: For fields other than Operator and Patient ID, only the default setting for the barcode type can be scanned. These are:
•CodeI2of5withUSSCheckDigit
•Code39FullASCIIwithCheckDigit
To Next Page
Loading...
Need help?
General
