Art: 730211-00B Rev. Date: 24-Feb-12
4
Enter Year of Birth
The operator enters the four digits
of the patient’s year of birth to
confirm the patient ID. The date
of birth is not displayed on the
handheld screen.
2. Not On List Action: The system administrator can select the desired behavior when the entered
patient ID is not found in the handheld’s patient list. The choices are:
Action, Not on List Action Definition Handheld Display Example
Disabled (Default
setting)
The PPID is not active. No warning
or lockout is displayed on the
handheld.
N/A
Warn
The operator is warned that the
patient ID is not found in the active
patient list.
Lockout
Testing cannot be performed using
this Patient ID.
Note 2.1: If Lockout is chosen above, the system administrator can choose to enable or disable a lockout
override. If the override is enabled, the operator can override the lockout by entering the patient ID twice.
Note 2.2: If Year of Birth is required for confirmation, but no Year of Birth is available in the patient list, the
patient ID will be considered not on the list
3. Print ID Attributes: The system administrator can select whether secondary patient identifiers (Name,
DOB, Gender) print with test results on the i-STAT or Martel printers.
To Next Page
Loading...
Need help?
General
