Art: 725708-00E Rev. Date 07-FEB-12 9
Follow the onscreen instructions.
If you do not see the screen
shown on the left—
—acknowledge the error
message(s) and click OK.
Return to Step
When the update is in progress, the following
screen will appear:
Do not move the Handheld until the success screen is displayed.
C
ancel
T
he application update is in progress.
Please do not remove the analyzer from
the Downloader.
Programming application block 108/2055
Close
The application update was successful.
The CLEW update was successful.
Cancel
1) If an analyzer is already in the Downloader
remove it.
2) Ensure the analyzer to be updated is off.
3
) Place the analyzer in the Downloader.
*
*If using the Serial Downloader/Recharger, a blue light will illuminate when the Handheld is placed correctly within it.
If using the Serial Downloader, a red light will illuminate when the Handheld is placed correctly within it.
The Receiving Handheld will have 1’s and 0’s streaming
across the screen signifying that it is receiving the software.
1.15
1.16
1.14
To Next Page
Loading...
Need help?
General
