3-34 Machine Maintenance Procedures
RTC Battery Removal 0
Prerequisite:
Upper Cover Removal
1. Locate RTC battery (B) on mainboard. Refer to Figure 3-29.
2. Remove battery (B) from mainboard connector (A) (Figure 3-33).
Figure 3-33. RTC Battery Removal
Follow local regulations for battery (Figure 3-33) disposal.
RTC Battery Installation 0
1. Install battery (B) to mainboard connector (Figure 3-33).
2. Install upper cover.
SG_JE50_HR.book Page 34 Thursday, December 23, 2010 3:47 PM
To Next Page
Loading...
