Machine Maintenance Procedures 3-9
Battery Pack Removal 0
1. Place computer on flat surface, battery side up.
2. Push battery lock/unlock latch (B) to unlock position.
3. Remove battery pack (A) from lower cover.
Figure 3-4. Battery
Follow local regulations for battery (A, Figure 3-4) disposal.
Battery Pack Installation 0
1. Move lock/unlock latch (B) into unlock position (Figure 3-4).
2. Install battery (A).
3. Move lock/unlock latch (B) into lock position.
SG_JE50_HR.book Page 9 Thursday, December 23, 2010 3:47 PM
To Next Page
Loading...
